How to Open a Computer Case |
I received all of my parts on time and I unpacked and checked every box to make sure that there was no damage to any of the computer parts. I set up all of my parts on a spare table and now I am ready to build my computer.
Note: When installing computer hardware always unplug the power supply and all peripherals connected to the computer. Also use caution because there are sharp edges in a computer system. It is a good idea to wear a static electricity discharge wristband. The discharge strap will avoid damaging the components in the computer. Some other tools that might be needed are a non magnetic screwdriver, a pair of tweezers and an anti-static bag.
Taking the side panels off:
- There are many different types and styles of computer cases on the market today. Most computer cases open with a unlock lever or have two fasteners or screws holding both of the side panels on. The computer case I am using has 4 screws holding both side panels on (Two Screws for each side). In my computer case, I will need to remove the four screws with a screwdriver and then using my hand, apply pressure to the side of the case and pull back. I will repeat this process for both sides. The sides of the case should pull back and unclip. Now I can pull the side panels away from the computer case.
|
|
|
Computer Case |
Screw holding the side Panel |
Unscrewing the side Panel |
|
|
Apply Pressure to the side of the case |
Pull back while the pressure is applied |
Removing the front panel:
- Once I have the side panels removed I have to remove the front panel. Front panels come off in a variety of fashions. Sometimes they use screws, fasteners or clips. The case I am using has four fasteners holding the front panel to the case. By squeezing the fasteners together I am able to unclip the front panel from the case.
|
|
Computer Case with side Panels off |
Fastener that holds the Front Panel to the Case |
|
The Front Panel Removed from the Computer Case |
Step 3: Prepare Computer Case |
|
|
