|
Unpacking the RAM and it will be checked for defects |
- I locate the RAM slots on the motherboard so that the locking tabs can be pushed out.
|
Pushing the RAM locking tabs into the unlocked position |
- Then I look for the alignment tabs on both the RAM sticks and the motherboard to ensure proper installation. The RAM I am using was easy to align because the sets of pins were longer on one side of the alignment tab than the other side. (Note: this will differ depending on the type of RAM and how it is installed.) I will install the two RAM sticks in slots one and four as per the Motherboard user guide. Always check the motherboard user guide to get the information about where the RAM is to be installed.
|
Locating the alignment slot |
- Now that the alignment slot on the RAM and the alignment tab on the Motherboard have been located it is time to install the RAM stick. I make sure the RAM is facing the proper direction before installing it. Applying firm pressure, I slide the RAM stick into the proper slot. I continue to apply pressure until the RAM stick clicks into place.
|
Installing the RAM stick into the RAM slot |
- After the RAM stick has clicked into place, I make sure the locking tabs are again locked in the upright position and that the RAM is fully seated in the slot.
|
Making sure the locking tabs are locked in properly and that the RAM is fully seated into the slot. |
- I will repeat this process for however many RAM sticks are being installed
Step 8: Install CPU Cooler
